Types and installation precautions of BRD purification plate.

Purification panel products

1、Fire retardant paper honeycomb purifying panel

The paper honeycomb can be made of color steel plate and stainless steel plate, and its flame retardant property is B1 (only carbonized but not burned). It has high rigidity, high strength, strong bearing capacity, good thermal insulation and sound insulation effect, and does not contain toxic components. It is very suitable for building wall and roof materials in electronic, biological, pharmaceutical, medical, food, aviation and other fields.

2、 Rock wool purification panel

The color steel profiled plate is used as the surface layer and the structural rock wool as the core layer. The combustion performance is a (non combustible), density: ≥ 120kg /rn, thermal conductivity: 0.046w/rn.K,. It has very strong fire-proof effect. It can be blocked on four sides according to your needs, and the reinforcing rib is added in the middle of the plate, so that the plate surface is more flat and the strength is higher.

3、 Glass magnesium flame retardant paper honeycomb cleaning panel

It is a new clean room wall material with inorganic, green and environmental protection building materials as the main body, special technology and scientific mechanism. The design of the workshop is in accordance with the requirements of the code. From the current development situation, it is one of the most ideal clean room color steel plate replacement products.

4、 Glass magnesium mesh handmade panel

Steel plate, cold drawn profile frame, glued. It is used in industrial workshop, warehouse, cold storage and air conditioner panel. The utility model has the advantages of smooth and beautiful appearance, sound insulation, heat insulation, anti-seismic and fire-proof performance.The filling materials of the products are all A-class refractory materials, which are high-grade fireproof building decoration composite plates in China at present. It can not only greatly reduce the engineering cost, but also can be disassembled and disassembled for many times. The construction and installation are convenient, and the comprehensive benefit is very remarkable.

5、 High efficiency antistatic and antibacterial purification plate

By adding special conductive pigment in the coating, the electric energy can be released, the dust can be prevented from adhering, and it is easy to remove. At the same time, the panel has the advantages of drug resistance, wear resistance and pollution resistance. It has non-toxic and semi permanent antibacterial and far-infrared radiation effects. The antibacterial purification plate can produce more than 99% anti bacteria rate to Escherichia coli and Staphylococcus aureus. It is an ideal and preferred material for pharmaceutical, food processing and other engineering fields.

6、 Aluminum honeycomb handmade panel

It adopts inorganic material, aluminum honeycomb, aluminum honeycomb + glass magnesium plate, etc., with beautiful surface, sound insulation, heat insulation, seismic resistance, and fire resistance performance meets national standards. According to the demander's engineering requirements, it can be produced and assembled. It can not only greatly reduce the cost of building foundation engineering and structural engineering, but also can be disassembled and disassembled many times. The construction and installation is convenient and fast, and the comprehensive benefit is very significant.

7、 Paper honeycomb handmade panel

Steel plate, cold drawn profile frame, glued. It is mainly used in ceiling, enclosure, industrial workshop, warehouse, cold storage and air conditioner panel of purification room. It has smooth and beautiful surface, sound insulation, heat insulation, anti-seismic, fire-proof performance, accurate geometric size, convenient installation, time-saving and labor-saving.

Precautions for installation of purification plate

1、 Protective film

When the construction is carried out under the environment of 5 ℃ - 40 ℃, the protective film shall be removed within 30 days after the completion of construction; if the construction environment is more than 40 ℃, the protective film shall be removed within 5 days after the completion of construction.

2、 Handling:

1) It is forbidden to carry by one person and pay attention to the corner protection;

2) Lift the panel, separate hands as far as possible, hold up the long side of the panel, and carry it upright to prevent excessive bending of the plate;

3) It is recommended that two pieces should be transported in overlapping at a time.

3、 Storage:

1) Ensure that the bottom is flat, the height of each stack is ≤ 800mm, and the storage height is ≤ 2500mm.

2) It can't be placed upright, and stacked according to the specifications and types.

3) Dry storage, no leakage, ensure the superiority of the panel.